Hymson F12035 Laser Pipe Cutter is comprehensively upgraded, refreshed and made all-round breakthroughs in processing efficiency.
The Hymson FP12035 Tube Laser Cutting Machine China is a customized four-jaw chuck fiber laser cutting machine, which is a brand new mechanism, can be used to process long tubes and heavy tubes.


Tube Laser Cutting Machine China | Tube Laser Cutting Machine Brand - Hymson

Product Introduction

Tube Laser Cutting Machine Brand

Hymson F12035 Laser Pipe Cutter is comprehensively upgraded, refreshed and made all-round breakthroughs in processing efficiency.
The Hymson FP12035 is a Four-jaw chuck fiber laser cutting machine, which is a brand new mechanism, can be used to process long tubes and heavy tubes.

  • The laser machine has a honeycomb welded structure and the cross beam has an integral plate welding honeycomb structure, thus the precision and stability of the whole machine are high and the one piece chuck is more stable.,
  • The diameter of the chuck is 260mm. The machining range is 20-260mm for round tubes or 20-180mm for square tubes,
  • The three-jaw chuck, a brand new mechanism, can be used to process long tubes and heavy tubes,
  • The brand new FSCUT5000S professional pipe cutting system integrates multiple cutting functions. The product has rich optional accessories. It is your ideal production tool for high efficiency laser processing and pipe cutting.

Main Structure


Tube Laser Cutting Machine China

Four-jaw Chuck

  • Precise detecting of jaw clamping status and pipe size to solve long and heavy workpieces  processing challenges
  • Intelligent tube support device,which provide multi-point support technology to aviod fluttering during processing of large size tubes
  • Clamping detection, preventing accidental disengagement collision

  • The thrust of a single jack catch of the full stroke high precision chuck is up to 1T, which is leading in the industry. The maximum clamping stroke is 360mm and can meet the cutting needs of most pipe types. The rear jack catch adopts the intelligent dust-exhaust system to greatly improve the dust prevention effect.

fibre tube laser cutting machine

          tube laser cutting machines for sale
  • The cross beam adopts the gantry type integral plate welding honeycomb structure, with the internal stress released through annealing treatment after welding, and is clamped and machined at a time using a gantry type processing center.

  • The main body of the laser machine adopts the honeycomb welded structure and the internal stress is released through annealing treatment after welding.
  • The guide surface is clamped and machined at a time using a large gantry type high precision processing center. The flatness and straightness of the guide surface are ≤0.05mm. The surface roughness is up to 0.8.
                                   stainless steel tube laser cutting machine

   tube laser cutting machine for sale
  • The auxiliary support adopts servo follow-up to effectively prevent the pipe from swaying from side to side when rotating at high speed, thus guarantees the precision of turning during cutting. The auxiliary support plays the role of guiding and supporting during feeding.



  • Loading device adopts multi mode chain.
  • Semi-automatic feeding can be realized.
Tube laser cutting machine manufacturers


CNC Numerical Control System


FSCUT5000S control system

  • FSCUT5000S laser cutting control system, developed on the basis of Windows 10 operating system, communicates through Erthercat bus and integrates laser cutting modules with special functions. The simple and concise interface, power and practical functions, touch display screen and wireless keyboard and mouse make it easy to operate.





Real-time frequency/power curve

  • To obtain high-quality acute and right angles, the software is equipped with a real-time frequency/power curve, which can be used to automatically adjust the laser radiation power according to the moving speed of the cutting head. When the speed of the cutting head is zero (stopping at the corner), the output radiation power is equal to the minimum power set in the setting to prevent the corner from burning out.

Extensive technological layer interface

  • FSCUT5000S provides 16 cutting layers, each of which can be set with a separate cutting speed, laser power, air pressure, cutting height and other technological parameters. The color of each layer is unique, which makes it easy to browse and configure the cutting graphic parameters.


Independent feeding control system

  • The automatic feeding mechanism and the host of the pipe cutting machine have two different interfaces. The automatic feeding system is controlled by Siemens S7-1500 series PLCs, which makes the mechanism highly integrated. The feeding mechanism and host data are communicated and interacted through Ethernet, but the operation on the feeding mechanism and the host do not interfere with each other. They work independently and synchronously, which can greatly improve the productivity and reduce the hassle of switching frequently within a screen when a problem arises.

MES or service invocation(optional)

API interface management

Access to API interfaces of the cloud terminal via token

Configuration of the token permissions.

After the configuration, token and secret will have access to the equipment information under the target path.

Classification of part of API interfaces (optional)


Nesting Software

  • TubesT is a complete set of integrated sheet metal CAD/CAM automatic programming software from design to production. It supports the whole-process CNC operations of the equipment, including drawing, automatic or interactive processing, CNC program simulation, manual and automatic cutting, machining program download and upload.
  • The graphic files generated by SolidWork software can be input directly.
  • Drawing 3D parts.
  • The built-in function of drawing parts can be applied to draw circular pipes, rectangular pipes, waist-type pipes, angle steels, channel steels, C-type steels, rounded triangles, ellipses and other standard pipe types. Circular holes, rectangular holes and waist-type holes are all viable; the holes can be arrayed along the X/Y/Z direction; and the cutting surfaces in any direction can be acceptable.
  • Importing standard parts in batch
  • <Importing standard parts in batch> refers to the automatic generation of corresponding parts by the software after importing the section type, dimension and other information of the parts into Excel. Three types of non-hole parts, i.e. circular pipes, rectangular pipes and waist-type pipes can be imported. The diagonal planes are also acceptable.

Welding Machine Laser

User’s Machine Installation Site Condition Preparation




Power Supply Capacity: ≥120KVA


Power Supply Requirements: (1) Three-phase voltage stability±5%; (2) Unbalancedness of three-phase power supply < 2.5% (Note: Abrupt changes in supply voltage and sudden power failure are not allowed, otherwise, the laser may be damaged easily. Good grounding is required (ground resistance < 3 Ohm).  


Compressed Air Supply Requirements:
(1) Air supply capacity: ≥ 0.8m3/min   (2) Air supply pressure: ≥ 7bar
(3) Dewpoint ≤ 5                 (4) Oil content ≤ 0.01ppm  Solid particle ≤ 0.01μm    


Auxiliary gas for cutting: Oxygen (O2)/ Nitrogen (N2): Purity ≥ 99.99%


Sheet (Tube) Cutting: Black skin, smooth, level, rustless, evenly rolled, reaching the ISO standard.


Installation Site Requirements: 1. The foundation for equipment installation does not settle and should be constructed according to the foundation drawing provided by Party B; 2. Temperature Requirement: [5-30]℃; 3. Humidity Requirement: < 70%; 4. After the equipment is installed and commissioned, separate the laser and install an air conditioner.


The equipment operator should have been graduated from a secondary specialized school or above and have the experience in operation of computers and general numerically-controlled lathes. The equipment should be equipped with a programming computer.

Installation and Commissioning

1. All the equipment provided under the contract should be installed and commissioned by Hymson. After the contract is signed, we will determine the specific installation location of the equipment in the shortest time and provide the equipment foundation drawing within 5 working days after the contract goes into effect. Prior to the installation and commissioning, you should prepare the equipment foundation strictly according to the requirements specified in the equipment foundation drawing provided by Hymson. After the installation site is ensured, the engineers will install and commission the equipment with the tools they carry and, within 10 days, complete the installation, commissioning, technical index tests, training, acceptance and delivery for use;
2. The expenses related to the installation and commissioning and the staff assigned should be borne by Hymson.


Transportation and Logistics

1. The place of delivery should be your installation site.
2. Standard packaging suitable for long-distance transportation by truck, being dampproof, rust-proof and shockproof; suitable for integral hoisting and indicating the centre of gravity for lifting and the hoisting position;
3. Mode of Transport: Motor transport. We should bear the freight and insurance.
4. Each packaging box should be accompanied by a detailed packing list and a quality certification as well as the instructions on the equipment and other documents and materials. The packing list should be outside the packaging box and the quality certification should be inside the packaging box.

Pre-sale Service

1. Welcome to send sample material to us for testing laser marking engraving for you.
2. We offer pictures, videos and other relevant documents for you to know more about the machine.
3. We are online and would respond fast to answer all your questions.
4. If you have chance visiting China, you are warmly welcome to visit our factory.


After-sale Service

1. Any parts have a quality problem during the warranty period, We will send you a new replacement for free. And Customer affords the replacement shipping cost.
2. The training video, detailed manual, and catalog sent with the machine. The customer could study the operation of the machine by watching the clear training video.
3. If there is a technical problem or new inquiry, Hymson has a fast response to service support by online or email even if need by the phone call.
4. Professional technical support and after sales following up. A free software update.



1) What are the primary products of your company?
Our primary products include sheet metal laser cutting machine, fiber laser 1500w cutting machine, tube laser cutting machine, precision laser cutting machine, laser welding machine, 1.5 kw fiber laser cutting machine at a great metal sheet cutter price.
2) Where is your fiber laser equipment applied to?
Our 1.5 kw fiber laser cutting machine is suitable for all kind of stainless steel, carbon steel, aluminium, copper, galvanized steel, electrolytic steel and silicon steel etc. 
3) What are the advantages of your laser equipment?
By using Hymson laser, you can monitor end-to-end process and take complete control of all the machining process. The whole machining process of the fiber laser 1500w cutting machine will be done smoothly, which will greatly improve production efficiency. In addition, the precision and consistency of the products in mass production is guaranteed.
4) How to do control the quality when you produce laser equipment?
We introduce international advanced production technology, and strictly implement a series of measures of quality and cost control to ensure the quality of laser cutting machine. In addition, all raw materials are strictly inspected in accordance with international standards before they are put into production.
5) Which countries are your laser machinery sold to?
Our fiber laser 1500w cutting machine sell all over the world, such as United States, Spain,Netherlands,Poland,France,Turkey, Switzerland,Iran,Egypt, India, South Africa, Malaysia, Canada,Mexico,Colombia,Brazil,Chile,Korea, Japan and many other countries.

1.5 kw fiber laser cutting machine

Performance Indexes

Equipment Model FP 12035
Tube Specification Circular Tubes:Φ20mm~Φ350mm
Square Tubes and Rectangular Tubes:□20mm~□250mm
Length of Cutting Residue ≥0mm
Maximum Weight of a Single Tube 1.2t
Floor Space of the Whole Machine 26000mm×5000mmx3000mm
X-axis/Y-axis Positioning Speed 60m/min
  Positioning Accuracy 0.03mm
Z-axis Positioning Speed 60m/min
  Positioning Accuracy 0.03mm
B1-axis and B2-axis Infinite Rotation 60rpm/min
B5-axis (Bevel Cutting Optional) Swing Angle ±45°

Let's watch a video of our company:

                     Hymson Laser, founded in 2008, has been making contributions to the fields of laser and automation. Now it has become the world's leading laser and automation equipment integrated solution provider and a national high-tech enterprise.

                  Aiming at sheet metal applications in different industries, Hymson provides users with professional and high quality product mixes and services, including comprehensive laser automation solutions, such as laser plate cutters, laser tube cutters, laser welding machines, laser automation software, etc.Widely used in engineering machinery, construction machinery, light industrial machinery, agricultural machinery, petroleum machinery, electrical manufacturing, automobile making and aerospace industries.

           Why choose Hymson laser

                     ● Intelligent dust exhaust system: Work on the cutting area only, strengthen the ventilation effect.
                     ● Intelligent gas control system: save gas up to 50%
                     ● Auto-focusing: accurate, fast and smart
                     ● Full-automatic lubrication system: Auto lubricate the gear and rack, maintenance free.
                     ● Installation/training & support by global factory trained engineers.

Related Products